Rooms With Several Radiator Thermostats; Add New Devices To An Existing System - Danfoss Ally User Manual

User Guide

5.1 Rooms with several Radiator Thermostats

5.2 Add new Devices to an existing System

Click on the 'Danfoss Ally™
Gateway' tile and add the
needed subdevice from the
suggested list.
BC349733524454en-010401
Danfoss Ally™ Gateway
If several radiator thermostats are assigned to one room, then
the Danfoss Ally™ App will automatically create a group tile. This
is to ensure settings are synchronized between devices in the
same room. It is recommended to always adjust a schedule and
preferred temperatures for the entire group, and not for single
devices, to ensure the most efficient performance.
If settings are changed on an individual device, then data is not
synchronised with the group.
Click on the 'Add subdevice'
button.
Choose the needed device
from the list and continue
process following the
installation flow guideline.
© Danfoss | FEC | 2023.06 | 9