Removing The Danfoss Ally™ Radiator Thermostat; Resetting The Danfoss Ally™ Radiator Thermostat To Default Settings - Danfoss Ally User Manual

User Guide
6.8 Removing the Danfoss Ally™ Radiator Thermostat
1.
Press and hold
This indicates you are in mounting mode
3.
Press firmly on the tab and unscrew the
thermostat from the adapter.
6.9 Resetting the Danfoss Ally™ Radiator Thermostat to default Settings
1.
Remove the cover and take out one battery.
14 | © Danfoss | FEC | 2023.06
Danfoss Ally™ Radiator Thermostat
until large M flashes.
2.
Remove the cover.
Video tutorial:
Danfoss Ally™ Support Page
2.
Press and hold , keep holding while rein-
serting the battery. The screen will go blank
after approx 3 seconds. The thermostat is
now re-set.
BC349733524454en-010401