Danfoss Ally™ Boiler Relay; Facts About The Danfoss Ally™ Boiler Relay; Technical Specifications - Danfoss Ally User Manual

User Guide
11. Danfoss Ally™ Boiler Relay
Danfoss Ally™ Boiler Relay is the ideal acces-
sory to optimize energy efficiency in boiler
systems, by ensuring that the boiler is only ac-
tive when there is an actual heat demand. The
Danfoss Ally™ Boiler Relay is a Zigbee certified
product, compatible with the Danfoss Ally™
Gateway and with the third party certified sys-
tems, using a Zigbee technology.
11.1 Facts about the Danfoss Ally™ Boiler Relay:
• Danfoss Ally™ Boiler Relay will activate or diactivate the boiler, depending on the heat de-
mand. This assures that the boiler will only be running when there is a heat demand.
• Controlled from the Danfoss Ally™ App.
• Zigbee 3.0 certified.
Product
Danfoss Ally™ Boiler Relay

11.2 Technical Specifications

Danfoss Ally™ Boiler Relay
Power supply
Output
Operating temperature range
Terminals
Control pollution situation
Controller type
Software class
Over voltage category
Temperature for Ball pressure test
Approvals, markings etc.
BC349733524454en-010401
Danfoss Ally™ Boiler Relay
Installation Guide – Languages
EN, DE, DK, FR, IT, PL, CZ, UA, SE, ES
Input: Mains 230V~ 50/60 Hz
Volt free 3(1)A at 250V~
0 °C to 40 °C
Max 2.5 mm
Degree 2
1B
A
III
75 °C
wires
2
© Danfoss | FEC | 2023.06 |
Code no.
014G2479
27