Display; Display Screen; Display Symbols; Display Rotation - Danfoss Ally User Manual

Hide thumbs Also See for Ally:

Table of Contents

User Guide

Display

Short press on

and the display screen appears.

The Danfoss Ally™ Radiator Thermostat is displaying the set temperature, not the measured

room temperature.

Installation Mode must always be activated when installing or removing the Danfoss

Ally™ Radiator Thermostat. The thermostat may be irreparably damaged if not in the

correct position during installation.

Temperature is shown in degrees Celsius. The Danfoss Ally™ Radiator Thermostat is dis-

playing the set temperature, not the measured room temperature.

The antenna symbol flashes when you need to connect the app to the thermostat.

Low battery. The battery icon will flash on the display.

The Danfoss Ally™ Radiator Thermostat can be mounted in a horizontal or vertical position, de-

pending on your radiator valve. You can set the display rotation to either 'horizontal' or 'vertical'

within the Danfoss Ally™ Radiator Thermostat App under advanced settings.

Danfoss Ally™ Radiator Thermostat can also be used as a stand-alone thermostat without con-

nection to the app.

Functionality is reduced.

Use the handwheel to adjust the temperature. The display shows the required temperature and

not the room temperature. In manual mode, there are no comfort or setback temperatures or

times set.

BC349733524454en-010401

Danfoss Ally™ Radiator Thermostat

Table of Contents

014g2400 014g2440