Download And Install The Danfoss Ally™ App. The First Use - Danfoss Ally User Manual

User Guide
4. Download and install the Danfoss Ally™ App. The first use
The Danfoss Ally™ gives you all the benefits of a full-blown smart heating system – packed in a
simple easy-to-use app. No more control unit – now your smartphone is all you need to control and
monitor all your radiators and floor heating.
In this way, you're always in control of your home heating. Whether you're at home or on the road.
You simply get more flexibility and comfort without the need for complicated hardware.
Step 1.
Download the Danfoss Ally™ App from Google play
or App Store
Step 2.
To enable smartphone control, your Danfoss Ally™
Gateway needs to be connected to the mains power
and the Ethernet. Use the cables provided with the
Ally™ Gateway.
Step 3.
Connect your Danfoss Ally™ Gateway to the network.
Make sure your mobile device is connected to Wi-Fi
from the same router as the gateway is connected to
with cable.
In case of unsuccessful connection, press and hold
"Reset" button for 5 seconds until the LEDs start blink-
ing, then release the button and repeat connection.
Step 4.
Finalise system setup by adding the subdevices.
The total number of units for the one Danfoss Ally™ Gateway must not exceed 128 mains and
32 battery powered devices:
Danfoss Ally™ Radiator Thermostat
Danfoss Ally™ Room Sensor
Danfoss Ally™ Zigbee Repeater
Danfoss Icon™ Master Controller (floor Heating)
Danfoss Icon™ Room Thermostat
Devices per room
Devices per one gateway
Rooms per one gateway
Homes/Families
6 | © Danfoss | FEC | 2023.06
Danfoss Ally™ Gateway
Danfoss Ally™
ally.danfoss.com
Reset
32 units
128 units
20 units
128 units
128 units
128 units
Unlimited
Unlimited
BC349733524454en-010401