Installation; Technical Specifications - Danfoss Ally User Manual

User Guide

13.1 Installation

4
Use the cover provided in the box

13.2 Technical Specifications

Danfoss Ally™ Power Module 24V
Power supply
Power cable
Ambient temperature range
Transportation temperature range
Safety classification
Pollution degree 2
Overvoltage category I
Color
Weight
IP class
Approvals, markings etc.
30 | © Danfoss | FEC | 2023.06
Danfoss Ally™ Power Module 24V
1
Remove the cover
5
Connect the cable to the existing 24 V supply
from a safe source with class II insulation
level (see quick guide attached for details)
2
Remove the batteries
(if tted)
6
When using Danfoss Ally™ Protect RA it
is important to install Danfoss Ally™ Power
Module 24V before completing the installation
of Danfoss Ally™ Protect RA. The cable should
go inside one of the cable tracks.
Input: 24V~ or 24V
Output: 3V -5%/+25%
2 m 0.75 mm2 H05VVH2-F
0 to 40 °C
-20 to 65 °C
Type 1
PD2
OVI 1,5 kV
RAL 9016
100 g
20 (not to be used in hazardous installations or in
places where it will be exposed to water)
3
Insert the Danfoss Ally™
Power Module 24V in the same place
SELV +/-25
BC349733524454en-010401