Monitoring Function And Alarm Description - JPT YDFLP-E-80&100-M7-M-R User Manual

YDFLP-E-80&100-M7-M-R User Manual
Figure 22 Optional function of performance mode
Selecting "Performance mode" in GUI, the average output power of the laser can be increased by
20% under the same cut-off frequency. The operational environmental temperature range 5~35℃
is recommended at this point.The sensor might be alarm if temperature beyond 5-35℃ and
continuous emitting the laser under the high energy. (Please refer to Monitoring function and
Alarm Description in Chapter 3.2.) This mode is not selected for default setting.
The recommended operation temperature range refers to below Table 12.
Table 12 Recommended Operating Temperature Range
Operational Mode Recommended Operating Temperature Range
Normal Mode 0~40℃
Performance Mode 5~35℃
Note：The parameter setting of TypeE software takes effect immediately, no need to restart laser.

3.2 Monitoring Function and Alarm Description

Some operation parameters and alarm conditions can be read by TypeE software. The laser
will send the number of saved alarms in the system to the GUI software each time when it is
turned on.
22 File Number:
JG-MCYF-SM-0039