Product Tour; Product Description - JPT YDFLP-150-M7-L1-X User Manual

1. Product Tour

1.1 Product Description

The JPT YDFLP pulsed fiber laser adopts the MOPA (Master Oscillator Power Amplifier)
configuration, in which a semiconductor laser diode serves as the master oscillator and the fiber
amplifiers boost the output power. For this MOPA pulsed fiber laser, the pulse width and pulse
repetition frequency are able to be adjusted independently. By changing the pulse width of the
fiber laser, the peak power of this MOPA fiber laser can be maintained at the same level for
different pulse repetition frequency. This feature makes the product an ideal laser source for
various industrial applications.
The MOPA fiber lasers get pumps through fiber couplers, which enables them with higher
slope efficiency compared to conventional solid state lasers. The fiber laser is more compact and
easy to carry, because it only uses three cooling fans to effectively remove the heat generated
inside the chamber. Besides, the whole fiber based laser cavity enables higher beam quality of
the laser output.
JPT MOPA fiber laser adopts the standard DB25 interface, and it's power supplied with
48V/12A DC(150W) or 48V/16A DC(200W), which makes it a good compatibility. A
photograph of a typical JPT MOPA fiber laser is as shown below.
YDFLP-150/200-M7-L1-X user manual
Figure 2 JPT MOPA Fiber Laser
Shenzhen JPT Opto -Electronics Co. Ltd.
2
Version :B Date:2018.9