JPT YDFLP-E-80&100-M7-M-R User Manual page 25

YDFLP-E-80&100-M7-M-R User Manual
External frequency and internal frequency setting examples:
[External Frequency]
[Internal Frequency]
*T=Duration of pulse period, maximum duration ≤ reduction frequency period
Pin9Lock： Power latch function is enabled if selected, the value of Pin1 to Pin8 is latched during
the rising edge. Default setting is not selected.
Pin23Stop ： Emergency stop function is enabled if selected. Low level is effective. Default
setting is not selected.
Fan Speed Control：The laser fan speed will be control according to the value of the built in
temperature sensor. If not selected, the fans will run at full speed. Default setting is selected.
Performance Mode:
21 File Number:
JG-MCYF-SM-0039