Operating Instructions - Max RB518 CE Operating And Maintenance Manual

Service Life of the Battery Pack
If any condition described below is observed, the
battery pack is at the end of its service life. Re-
place it with a new one.
• Although the battery pack has been properly
charged (fully charged), a great drop in tying
time has been noticed.
NOTICE
Do not charge the battery pack when this hap-
pens. If the motor's rotational speed slows
down, the power of the battery pack is consid-
ered to be nearly depleted. Using the tool
more will cause it to overdischarge, resulting
in a shortened service life of the battery pack
and also in functional trouble of the tool's
main body.
NOTICE
Do not use a battery pack when its service life
is finished.
This will cause functional trouble in the tool's
main body. Also charging a battery pack that
is out of service life will lead to functional trou-
ble in the battery charger.
Recycling a Li-ion Battery
The MAX battery pack uses a Li-ion battery, it
may be illegal to dispose of this battery into the
municipal waste system. Check with your local
solid waste officials for details in your area for re-
cycling options or proper disposal.
CAUTION
When disposing of the battery pack, make
sure to put a pack cap on its terminal (with in-
sulating tape securing it) to prevent short cir-
cuits.
5. OPERATING INSTRUC-
TIONS
LOCK
1. How to set the Tie-Wire
WARNING
• Be sure to set the Main switch to off, to lock
the Trigger, and detach the Battery pack.
Release Stopper
1 Press the Release Lever of this equipment,
and confirm that the Release Lever is caught
in the Release Stopper.
18
OFF
Release Lever