Table of Contents
Advertisement
Installing Battery
1.Unscrew the ignition battery cap. (Found at far left of
control panel).
2.Install battery into ignition box with positive terminal
facing outward.
3.Replace the ignition battery cap after the battery has
been installed. (Fig.16)
When you have finished assembling grill, make
sure that all screws and nuts are tight and secure.
Installing Grease Cup
Attach the greasy tray heat shield to greasy tray using
(2) 5/32 x10mm Phillips head screws and (2) 5/32 lock
washers & (2) 5/32 flat washers .（Fig.17)
From the rear of the grill, remove the grease tray,
remove the packaging materials, then insert grease
cup into grease tray as shown (Fig.18). Push grease
tray back to grill.
Installing Cooking Components
Important: Before cooking on your grill the first time,
wash cooking grids and cooking rack with warm ,
soapy water. Rinse and dry thoroughly. Season with
cooking oil regularly. After cooking is completed, turn
grill to HIGH setting for 3 to 5 minutes to burn off
excess grease or food residue.
1. Install heat diffusers above burners. Holes in rear
corners of diffusers attach onto pegs in the back
ledge of firebox. Ensure that grill head heat shield is
inserted securely into slots. If grill was shipped with
shield taped in place, remove tape before using grill.
2. Evenly space cooking grids on the ledge above
heat diffusers. (Fig.19)
3. Insert legs of warming rack into the holes in the
top of grill bowl side panels. (Fig.19)
Figure 16
Figure 17
Figure 18
Figure 19
11
300
400
50 0
200
60 0
10 0
800
700
Advertisement
Table of Contents
