Safety; Intended Use; General Safety Notes For The Measurement System; Explanation Of The Warnings - Balluff BMD 1EAA Series User Manual

Microwave positioning sensor
Table of Contents

Advertisement

Available languages

Available languages

BMD 1E _ A- _ _ _ _ / _ _ _ -A _ 502A-LV _ _ _ -KS288
Microwave Positioning Sensor
2

Safety

2.1

Intended use

Together with a control system, the BMD microwave
positioning sensor forms a measurement system. It is
installed in a hydraulic cylinder on a vehicle or a system
and may only be operated when installed. Flawless
working principle in accordance with the specifications in
the technical data is ensured only when using original
Balluff accessories. Use of any other components will void
the warranty.
Opening the BMD microwave positioning sensor or non-
approved use are not permitted and will result in the loss of
warranty and liability claims against the manufacturer.
2.2
General safety notes for the measurement
system
Installation and startup may only be performed by
trained specialists with basic electrical knowledge.
Qualified personnel are persons whose technical
training, knowledge and experience as well as knowledge
of the relevant regulations allows him to assess the work
assigned to him, recognize possible hazards and take
appropriate safety measures.
The operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the sensor will not result in hazards to persons or
equipment.
If defects and unresolvable faults occur in the sensor, take
it out of service and secure against unauthorized use.
www.balluff.com
2.3

Explanation of the warnings

Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a hazard that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
2.4

Disposal

► Observe the national regulations for disposal.
english
5

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Bmd 1eba series

Table of Contents