Advertisement
Available languages
Available languages
1.
Safety Information
1.1. Intended use
The CANopen Dynamic Inclinometer is a MEMS-based inclination sensor with CANopen interface. This device
provides precise and reliable inclination measurement in both static and dynamic conditions. The use of this
device in a machine or system is permitted only under the following conditions:
▪
The user is trained and competent in the integration and use of inclination sensors in machinery.
▪
The user is familiar with the contents of both the datasheet and user manual.
▪
The user has a full understanding of CAN and CANopen.
▪
The device is used within the specified environmental conditions.
▪
The device is properly configured for its intended use.
▪
The device is mounted correctly as described in the datasheet and user manual.
▪
The device data is expressly not interpreted as safety data, except when used redundantly in a control
system that is designed and tested for cross-check functionality between the primary and redundant
devices.
1.2. Incorrect use
▪
Use of non-standard CAN cables.
▪
Device mounted incorrectly.
▪
Zero adjustment outside the specified range.
▪
Incorrect or absent CAN bus termination.
▪
Device used outside the specifications.
1.3. Sensor defective
The sensor is considered "defective" when
▪
No CAN output can be detected.
▪
An emergency message with sensor error information is detected. (→ 5.8)
In the event of uncertainty, contact the distributor or manufacturer. Any unauthorised modification or unapproved
use will void both the warranty and any liability on the part of the manufacturer.
2.
About this manual
2.1. Intended use
This manual is only valid for all BSI R65K0-HXXA-... inclination sensors.
2.2. Symbols used in the text
Subscript for hexadecimal values.
h
Subscript for decimal values.
d
Caution that indicates either potential damage to the sensor or explains how to avoid a
problem.
Important information.
→
Cross-reference
www.balluff.com
3
Advertisement
Chapters
