Closemount Instructions - Honeywell BELMAR Manual

13. Remove the canopy cover from the bottom of the
canopy (Fig. 13).
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
14. Align the canopy with the closemount screw holes
in the top of the motor assembly. Secure the
canopy to the top of the motor housing by installing
three closemount screws and spring washers into
the top of the motor housing (Fig. 14).
Closemount Screw
15. Raise the fan and place the canopy on the
mounting bracket hook for wiring (Fig. 15).

CLOSEMOUNT INSTRUCTIONS

Spring Washer
Fig. 13
Fig. 14
Fig. 15
10
Canopy
Cover
Closemount
Screws
Spring
Washer
Canopy
Canopy
Hook