25. Align holes in the switch housing cap with holes
in upper switch housing. Re-insert screws and
washers that were previously removed. Use a
Phillips screwdriver (not included) to secure all
screws (Fig. 25).
Washer
Screw
26. Install each bulb (Fig. 26).
Important: When replacing the bulb, allow bulb and
light kit to cool before touching.
27. Remove the preinstalled rubber washer, nut, finial
cap, and finial from the light kit (Fig. 27).
LIGHT KIT INSTALLATION
15
Fig. 25
Fig. 26
Fig. 27
Nut
Screw
and
Washer
Socket
Rubber
Washer
Finial Cap
Finial