Table of Contents
Advertisement
13. Remove the canopy cover from the bottom of the
canopy (Fig. 13).
Helpful Hint: Closemount-style mounting is more
suitable for ceilings lower than 8 ft. (2,44 m) high.
The downrod and canopy cover are not used in this
type of installation.
14. Align the canopy with the closemount screw holes
in the top of the motor housing. Secure the canopy
to the top of the motor housing by installing three
closemount screws and spring washers (Fig. 14).
Closemount Screw
15. Raise the fan and place the canopy on the hook
located on the mounting bracket for wiring (Fig. 15).
CLOSEMOUNT INSTRUCTIONS
Spring Washer
Fig. 13
Fig. 14
Spring
Washer
Fig. 15
10
Canopy
Cover
Closemount
Screws
Canopy
Canopy
Hook
Advertisement
Table of Contents
