READ AND SAVE THESE
BEFORE USING THIS FAN
When using electrical appliances,
basic precautions should always be
followed to reduce the risk of fire,
electric shock, and injury to
persons, including the following:
Use this fan only as described in this
manual. Other use not recommended
as it may cause fire, electric shock or
injury to persons.
This product is intended for
household use ONLY and not for
commercial, industrial or outdoor use.
To protect against electric shock, do
not place fan in window, immerse
unit, plug or cord in water or spray
This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of shock, this plug is
intended to fit only one way in a
polarized outlet. If the plug does not
fit fully in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician. DO NOT attempt
to defeat this safety feature.
EFY-041 Series, EFY-045 Series
EFY-047 Series, HY-041 Series
HY-047 Series, HY-048 Series
Close supervision is necessary when
any appliance is used by or near
Turn the fan OFF and unplug the fan
from the outlet when not in use, when
moving the fan from one location to
another and before cleaning.
To disconnect the fan, first turn the
unit OFF, grip the plug and pull it
from the wall outlet. Never pull the
plug by the cord.
Do not operate the fan in the presence
of explosive and/or flammable fumes.
Do not place the fan or any parts near
an open flame, cooking or other
10. Do not operate the fan with a
damaged cord or plug or if the
product malfunctions, is dropped or
damaged in any manner (see
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer
may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall or
15. Do not operate if the fan housing is
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the
plug. Contact a qualified electrician to
replace loose or worn outlet.
WARNING: To Reduce The Risk of
Fire or Electric Shock, Do Not Use
This Fan With Any Solid-State