Closemount Instructions - Honeywell RIO Manual

14. Remove the canopy cover from the bottom of the
canopy (Fig. 14).
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
15. Align the canopy with the closemount screw holes
in the top of the motor housing. Secure the canopy
to the top of the motor housing by installing three
closemount screws and spring washers into the top
of the motor housing (Fig. 15).
Closemount Screw
16. Raise the fan and place the canopy on the
mounting bracket hook for wiring. Insert the
receiver into the mounting bracket with the flat side
facing the ceiling (Fig. 16).

CLOSEMOUNT INSTRUCTIONS

Spring Washer
Fig. 14
Fig. 15
Fig. 16
10
Canopy
Cover
Closemount
Motor
Housing
Ceiling
Receiver
Canopy
Canopy
Screws
Spring
Washer
Hook