Closemount Instructions - Honeywell 50198 Manual

13. Remove the canopy cover from the bottom of the
canopy (Fig. 13)
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
14. Remove the three closemount screws and washers
from the top of the motor housing. Align the canopy
with the closemount screw holes in the top of the
motor housing. Secure the canopy to the top of
the motor housing by reinstalling the closemount
screws and washers into the top of the motor
housing (Fig. 14).
Closemount Screw
15. Raise the fan and place the canopy on the
mounting bracket hook for wiring (Fig. 15).

CLOSEMOUNT INSTRUCTIONS

Spring Washer
Fig. 13
Canopy
Cover
Fig. 14
Spring
Washer
Fig. 15
10
Canopy
Closemount
Screws
Canopy
Hook