1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Extender
  5. DAP-1325
  6. User manual

D-Link DAP-1325 User Manual

N300 wi-fi range extender
Hide thumbs Also See for DAP-1325:
Table of Contents

Advertisement

Quick Links

User Manual
DAP-1325
N300 Wi-Fi Range Extender
May 2018

Advertisement

Table of Contents
loading

Related Manuals for D-Link DAP-1325

Summary of Contents for D-Link DAP-1325

  • Page 1 User Manual DAP-1325 N300 Wi-Fi Range Extender May 2018...

  • Page 2: Table Of Contents

    DAP-1325 N300 Wi-Fi Range Extender User Manual Contents Chapter 1. Introduction..........4 Contents and Audience............4 Conventions..............4 Document Structure............4 Chapter 2. Overview..........5 General Information............5 Specifications..............6 Product Appearance............8 Upper Panel...............8 Bottom Panel..............9 Delivery Package............10 Chapter 3. Installation and Connection......11 Before You Begin............11 Connecting to PC............12 PC with Ethernet Adapter..........12...
  • Page 3 DAP-1325 N300 Wi-Fi Range Extender User Manual Advanced..............72 DNS..............72 Firewall..............74 MAC Filter...............74 System..............76 Configuration............77 Firmware Update............79 Local Update............80 Remote Update............81 Log..............82 Ping..............84 Traceroute...............85 Telnet..............86 System Time..............87 Chapter 5. Operation Guidelines.........89 Safety Rules and Conditions..........89 Wireless Installation Considerations........90 Chapter 6. Abbreviations and Acronyms......91...

  • Page 4: Chapter 1. Introduction

    Chapter 2 gives an overview of the extender's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the extender DAP-1325 and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.

  • Page 5: Chapter 2. Overview

    DAP-1325 to a wired router. The LED clearly shows the signal level of the wireless network to which DAP-1325 is connected. Due to this, you can easily find the best location for the extender.

  • Page 6: Specifications

    DAP-1325 N300 Wi-Fi Range Extender Overview User Manual Specifications Hardware Processor · MT7628NN (580MHz) · 64MB, DDR2 SDRAM Flash · 8MB, SPI Interfaces · 10/100BASE-TX LAN port LEDs · POWER/WPS · Wi-Fi Signal Strength Buttons · WPS button to set up wireless connection ·...
  • Page 7 DAP-1325 N300 Wi-Fi Range Extender Overview User Manual Wireless Module Parameters Transmitter output power · 802.11n (typical at room temperature 25 °C) The maximum value of the transmitter 15dBm (+/-1.5 dB) output power depends upon the radio frequency regulations applied in your country ·...

  • Page 8: Product Appearance

    The Wi-Fi Signal Strength LED is a LED scale. It shows the signal strength of the wireless network to which DAP-1325 is connected. The more LEDs are on, the better the signal strength is. To improve the signal strength, move the extender closer to the source of the signal.

  • Page 9: Bottom Panel

    DAP-1325 N300 Wi-Fi Range Extender Overview User Manual The RESET and WPS buttons are located on the upper panel of the extender. Button Description A button to restore the factory default settings. RESET To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.

  • Page 10: Delivery Package

    • “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with different parameters than those indicated on the device will cause damage and void the warranty for this product.

  • Page 11: Chapter 3. Installation And Connection

    Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment. Operating System Configuration of the wireless extender DAP-1325 (hereinafter referred to as “the extender”) is performed via the built-in web-based interface. The web-based interface is available from any operating system that supports a web browser.

  • Page 12: Connecting To Pc

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between the Ethernet port of the extender and the Ethernet port of your PC. 2. Plug the device into an electrical outlet or power strip.
  • Page 13 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual 3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line. Click the Properties button. Figure 4. The Local Area Connection Properties window.
  • Page 14 5. Click the ОК button in the connection properties window. Now you can connect to the web-based interface of DAP-1325 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.

  • Page 15: Configuring Ip Address In Os Windows 7

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Configuring IP Address in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 16 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 7. The Network and Sharing Center window. Page 16 of 92...
  • Page 17 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 8. The Network Connections window. Page 17 of 92...
  • Page 18 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 9. The Local Area Connection Properties window.
  • Page 19 7. Click the OK button in the connection properties window. Now you can connect to the web-based interface of DAP-1325 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.

  • Page 20: Pc With Wi-Fi Adapter

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual PC with Wi-Fi Adapter 1. Plug the device into an electrical outlet or power strip. 2. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to your PC documents).

  • Page 21: Configuring Wi-Fi Adapter In Os Windows Xp

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. In the Network Connections window, right-click the relevant Wireless Network Connection icon.
  • Page 22 After that the Wireless Network Connection Status window appears. Now you can connect to the web-based interface of DAP-1325 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.

  • Page 23: Configuring Wi-Fi Adapter In Os Windows 7

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 24 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual 6. Select the Use the following IP address radio button and enter the value 192.168.0.51 in the IP address field. The Subnet mask field will be filled in automatically. Click the OK button.
  • Page 25 11. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale. Now you can connect to the web-based interface of DAP-1325 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.

  • Page 26: Connecting To Web-Based Interface

    IP address of the extender (by default, the following IP address is specified: 192.168.0.50). Press the Enter key. Figure 17. Connecting to the web-based interface of the DAP-1325 device. If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ Could not connect to remote server ”) occurs upon connecting to the web-based interface of the...
  • Page 27 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.

  • Page 28: Web-Based Interface Structure

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 20. The summary page. Page 28 of 92...
  • Page 29 DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual The Device Information section displays the model and hardware version of the extender, the firmware version, and other data. To contact the technical support group (to send an e-mail), left-click the support e-mail address.

  • Page 30: Menu Sections

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Menu Sections To configure the extender use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...

  • Page 31: Notifications

    DAP-1325 N300 Wi-Fi Range Extender Installation and Connection User Manual Notifications The extender's web-based interface displays notifications in the top right part of the page. Figure 21. The web-based interface notifications. Click the icon displaying the number of notifications to view the complete list and click the relevant button.

  • Page 32: Chapter 4. Configuring Via Web-Based Interface

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual CHAPTER 4. CONFIGURING WEB-BASED INTERFACE Initial Configuration Wizard To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened page, click the OK button and wait until the factory default settings are restored.
  • Page 33 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual You can finish the wizard earlier and go to the menu of the web-based interface. To do this, click the ADVANCED SETTINGS button. On the opened page, change the default settings: specify the administrator password in the Admin password field and the name of the wireless network in the Network name (SSID) field.

  • Page 34: Selecting Operation Mode

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Selecting Operation Mode In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Wired connection value.

  • Page 35: Changing Lan Ipv4 Address

    This configuration step is available for the Access point, Repeater, and Client modes. 1. If the LAN IPv4 address of DAP-1325 coincides with the LAN IPv4 address of the router to which it connects, then set another LAN IPv4 address of DAP-1325 in the IP address field.

  • Page 36: Wi-Fi Client

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the Repeater and Client modes. 1. On the Wi-Fi client page, in the Wireless Networks section, select the network to which you want to connect.
  • Page 37 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual If you connect to a hidden network, from the Connecting to network list select the Connect to hidden network value. Enter the network name to the Network name (SSID) field. Then select a needed value from the Network authentication list and then, if needed, enter the password in the relevant field.

  • Page 38: Configuring Wireless Network

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Configuring Wireless Network This configuration step is available for the Access point and Repeater modes. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network or leave the value suggested by the extender.

  • Page 39: Changing Web-Based Interface Password

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. You may set any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other characters available in the US keyboard layout.

  • Page 40: Statistics

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the extender: network statistics • IP addresses leased by the DHCP server • data on devices connected to the extender's network and its web-based interface •...

  • Page 41: Dhcp

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).

  • Page 42: Clients

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Clients On the Statistics / Clients page, you can view the list of devices connected to the extender. Figure 36. The Statistics / Clients page. For each device the following data are displayed: the IP address, the MAC address, and the network interface to which the device is connected.

  • Page 43: Multicast Groups

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.

  • Page 44: Connections Setup

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the extender for operation in the local network. To configure the extender's basic parameters, go to the Connections Setup / LAN page.
  • Page 45 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the DHCP section, you can configure the built-in DHCP server of the extender. The DHCP server is disabled by default. Figure 39. Configuring local IP addresses. The IPv4 tab. The DHCP section.
  • Page 46 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IPv4 address in the local area network for a device with a certain MAC address).

  • Page 47: Ipv6

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change IPv6 address of the extender and configure IPv6 addresses assignment settings. Figure 41. Configuring local IP addresses. The IPv6 tab. The IP section.
  • Page 48 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the DHCP section, you can configure the built-in DHCP server of the extender. The DHCP server is disabled by default. Figure 42. Configuring local IP addresses. The IPv6 tab. The DHCP section.

  • Page 49: Wi-Fi

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the extender and configure the basic and additional wireless networks.
  • Page 50 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to let the extender search for a free Enable periodic channel in certain periods of time. When the switch is moved to the scanning right, the Scanning period field is available for editing.
  • Page 51 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Parameter Description Wi-Fi Network A name for the wireless network. The name can consist of digits and Network name (SSID) Latin characters. If the switch is moved to the right, other users cannot see your Wi-Fi Hide SSID network.
  • Page 52 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of the wireless network is specified. WPS PIN from the barcode label is used as the network key.
  • Page 53 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Authentication type Description A mixed type of authentication. When this value is selected, devices WPA-PSK/WPA2-PSK using the WPA-PSK authentication type and devices using the mixed WPA2-PSK authentication type can connect to the wireless network.
  • Page 54 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Parameter Description For Open authentication type only. To activate WEP encryption, move the switch to the right. Upon that Enable encryption WEP the WEP type and Default key ID drop-down lists, the Encryption key WEP as HEX switch, and four Encryption key fields are displayed on the page.
  • Page 55 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the following fields are displayed on the page: Figure 47. The WPA2-PSK value is selected from the Network authentication drop-down list.
  • Page 56 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 48. The WPA2 value is selected from the Network authentication drop-down list.

  • Page 57: Client Management

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the extender. Figure 49. The page for managing the wireless clients.

  • Page 58: Wps

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN. The WPS function helps to configure the protected wireless network automatically. Devices connecting to the wireless network via the WPS function must support the WPS function.
  • Page 59 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual When the WPS function is enabled, the Information section is available on the page. Parameter Description The state of the WPS function: Configured (all needed settings are specified; these settings •...

  • Page 60: Using Wps Function Via Web-Based Interface

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1. Move the Enable WPS switch to the right.

  • Page 61: Using Wps Function Without Web-Based Interface

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the extender. To do this, you need to configure the following extender's settings: 1.

  • Page 62: Wmm

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
  • Page 63 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual To edit the parameters of an Access Category, left-click the relevant line. In the opened window, change the needed parameters. Figure 52. The window for changing parameters of the WMM function.
  • Page 64 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Click the SAVE button. To disable the WMM function, move the Enable switch to the left. Page 64 of 92...

  • Page 65: Client

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the extender as a client to connect to a wireless access point. Figure 53. The page for configuring the client mode.
  • Page 66 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the Wireless Networks section, the list of available wireless networks is displayed. To view the latest data on available wireless networks, click the Update list button. To connect to a wireless network from the list, select the needed network. Move the Network options switch to the right to view more detailed information on the network to which the extender connects.
  • Page 67 An encryption method: TKIP, AES, or TKIP+AES. When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DAP-1325 will switch to the channel of the access point to which you have connected.

  • Page 68: Additional

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the extender. Changing parameters presented on this page may negatively affect your WLAN! Figure 54.
  • Page 69 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Parameter Description The 802.11b and 802.11g protection function is used to minimize collisions between devices of your wireless network. Select a value from the drop-down list. Auto: The protection function is enabled and disabled automatically...

  • Page 70: Mac Filter

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 71 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Figure 56. The window for adding a rule for the MAC filter. You can specify the following parameters: Parameter Description A wireless network to which the rule will be applied. Select the SSID needed value from the drop-down list.

  • Page 72: Advanced

    To do this, click the ADD button. Figure 58. The window for adding a DNS record. 3 You need to specify the IP address of the extender as a DNS server for clients of the DAP-1325 device to allow them to use the records.
  • Page 73 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the IP address field, specify a host. In the Name field, specify the domain name to which the specified IP address will correspond. Click the SAVE button. To edit an existing record, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.

  • Page 74: Firewall

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Firewall In this menu you can configure the MAC filter of the extender. MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for devices connected to the extender.
  • Page 75 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule. Enable rule Move the switch to the left to disable the rule.

  • Page 76: System

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the extender's settings • restore the factory default settings • create a backup of the extender's configuration •...

  • Page 77: Configuration

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the extender and to access the device settings via...
  • Page 78 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can Factory restore the factory defaults via the hardware RESET button (see the Upper Panel section, page 8).

  • Page 79: Firmware Update

    To enable the automatic check for firmware updates, in the Remote update section, move the Check for updates automatically switch to the right and click the APPLY SETTINGS button. By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified.

  • Page 80: Local Update

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the extender before the firmware update is completed. This may cause the device breakdown. To update the firmware of the extender locally, follow the next steps: 1.

  • Page 81: Remote Update

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the extender before the firmware update is completed. This may cause the device breakdown. To update the firmware of the extender remotely, follow the next steps: 1.

  • Page 82: Log

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host. Figure 63. The System / Log page.
  • Page 83 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Parameter Description The IP or URL address of the host from the local or global network, Server to which the system log will be sent. A port of the host specified in the Server field. By default, the value Port 514 is specified.

  • Page 84: Ping

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility. The Ping utility sends echo requests to a specified host and receives echo replies.

  • Page 85: Traceroute

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility. Figure 65. The System / Traceroute page.

  • Page 86: Telnet

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. By default, access is enabled. Figure 66. The System / Telnet page.

  • Page 87: System Time

    DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the extender or configure automatic synchronization of the system time with a time server on the Internet.
  • Page 88 DAP-1325 N300 Wi-Fi Range Extender Configuring via Web-based Interface User Manual When the extender is powered off or rebooted, the system time is reset to the default value. If you have set automatic synchronization for the system time, the internal clock of the device will be configured after connecting to the Inter net.

  • Page 89: Chapter 5. Operation Guidelines

    DAP-1325 N300 Wi-Fi Range Extender Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the device is not damaged. The device should be used only as intended in accordance with the documents.

  • Page 90: Wireless Installation Considerations

    RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DAP-1325 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).

  • Page 91: Chapter 6. Abbreviations And Acronyms

    DAP-1325 N300 Wi-Fi Range Extender Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier Cyclic Redundancy Check DDNS Dynamic Domain Name System DDoS Distributed Denial of Service...
  • Page 92 DAP-1325 N300 Wi-Fi Range Extender Abbreviations and Acronyms User Manual PPTP Point-to-point tunneling protocol Pre-shared key Quality of Service RADIUS Remote Authentication in Dial-In User Service Routing Information Protocol Request To Send RTSP Real Time Streaming Protocol Session Initiation Protocol...

Table of Contents