Firmware Update - D-Link DAP-1325 User Manual

DAP-1325 N300 Wi-Fi Range Extender
User Manual

Firmware Update

On the System / Firmware Update page, you can update the firmware of the extender and
configure the automatic check for updates of the extender's firmware.
!
Update the firmware only when the extender is connected to your PC via a wired
connection.
You can view the current version of the extender's firmware on the Summary page.
By default, the automatic check for the extender's firmware updates is enabled. If a firmware update
is available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the Remote update section, move the
Check for updates automatically switch to the left and click the APPLY SETTINGS button.
To enable the automatic check for firmware updates, in the Remote update section, move the
Check for updates automatically switch to the right and click the APPLY SETTINGS button.
By default, in the Remote server URL field, the D-Link update server address
(fwupdate.dlink.ru) is specified.
You can update the firmware of the extender locally (from the hard drive of your PC) or remotely
(from the update server).
Figure 62. The System / Firmware Update page.
Page 79 of 92
Configuring via Web-based Interface