DAP-1325 N300 Wi-Fi Range Extender
User Manual
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, move the Logging switch to the right. Then specify the
needed parameters.
Parameter
Logging type
Logging level
Figure 63. The System / Log page.
Select a type of logging from the drop-down list.
Local: the system log is stored in the extender's memory.
•
When this value is selected, the Server and Port fields are
not displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Local and remote: the system log is stored in the extender's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
Page 82 of 92
Configuring via Web-based Interface
Description