D-Link DAP-1325 User Manual page 78

DAP-1325 N300 Wi-Fi Range Extender
User Manual
The following buttons are also available on the page:
Control
Factory
Backup
Restore
Save
Reboot
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Upper Panel section, page 8).
Click the button to save the configuration (all settings of the
extender) to your PC. The configuration backup will be stored in the
download location of your web browser.
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the extender)
located on your PC and upload it.
Click the button to save settings to the non-volatile memory.
The extender saves changed settings automatically. If changed
settings have not been saved automatically, a notification is
displayed in the top right part of the page.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Page 78 of 92
Configuring via Web-based Interface
Description