Client - D-Link DAP-1325 User Manual

DAP-1325 N300 Wi-Fi Range Extender
User Manual

Client

On the Wi-Fi / Client page, you can configure the extender as a client to connect to a wireless
access point.
To configure the extender as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz
Connecting to network
Figure 53. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
extender's WLAN. Upon that the extender can connect to another
access point as a wireless client.
A method for connecting to another access point.
Page 65 of 92
Configuring via Web-based Interface
Description