Introduction Introduction Overview This product is a slim transmitter receiver pair which is designed to extend HDMI 1080P@60Hz signals up to 70m/230ft and 4K@60Hz signals up to 40m/131ft via a single Cat 6a/7 cable. The transmitter and receiver can supply power to each other reciprocally. When either side is plugged in the power, both sides are powered on.
Introduction Panel Front Panel Transmitter & Receiver Name Description On: The device is powered on. Power Off: The device is powered off. Blinking: The device is working properly. Status Off: The device is not working properly. On: HDCP protected content is being transmitted. Blinking: Non-HDCP protected content is being...
Page 4
Application Receiver Name Description Connect to a DC 18V 1A power adapter. Note: If receiver is connected to a power supply, DC 18V transmitter is adapter free. HDBT In Connect to the transmitter via a Cat5e/6 cable. IR In Connect to an IR receiver cable. Secure the IR receiver with adhesive.
Warranty Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.
Need help?
Do you have a question about the 4KEX70-L and is the answer not in the manual?
Questions and answers