Connect/Disconnect An Active; Device; Remove A Paired Device - AT&T TL87203 User Manual

Bluetooth
Bluetooth setup
Connect/disconnect an active device
While in the device list menu, you may connect or disconnect your
active device.
1. Press MENU
2. Press CID, DIR, /RECORD, or /DELETE to highlight Bluetooth, and
then press SELECT
3. Press CID, DIR, /RECORD, or /DELETE to highlight Device list, and
SELECT
then press
4. Press CID, DIR, /RECORD, or /DELETE to highlight a device, and then
OPTION
press
5. Press CID, DIR, /RECORD, or /DELETE to highlight
Connect/Disconnect (whichever is applicable), and then press
The telephone base displays Device connected/Device disconnected.
You hear a confirmation tone.
NOTE: When your active device is connected, you are prompted to select Disconnect. When
your active device is disconnected, you are prompted to select Connect.

Remove a paired device

When you already have a maximum of 4 paired devices and you want to add
another device, you must first delete one from the device list.
To remove a paired device:
MENU
1. Press
the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Bluetooth, and then press
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Device list, and then press
4. Press CID, DIR, /RECORD, or /DELETE to
highlight the desired device, and then press
5. Press CID, DIR, /RECORD, or /DELETE to
highlight Remove, and then press
6. The handset displays Remove Cell Phone X? or
Remove Headset X? (X represents the slot of the
device). Press
displays Device removed from device list and you
hear a confirmation tone.
on the telephone base in idle mode to enter the main menu.
.
.
.
on the telephone base in idle mode to enter
YES to confirm. The telephone base
SELECT
.
SELECT .
OPTION
SELECT
.
42
SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK
DEVICE LIST
A:Cel l Phone A
B:Headset A
BACK
.
Headset A
Connect
Remove
BACK
Remove
Headset A
?
NO
Device removed
from
device list
.
SELECT
OPTION
SELECT
YES