Advertisement
Quick Links
Quick Installation Guide
EC700-BT
Package Contents
Panel
Front View
Power
Back View
Note:
This port can be in VGA or DVI-I.
DFI reserves the right to change the specifications at any time prior to the product's release. This
QIG may be based on editions that do not resemble your actual products. For the latest revision and
more details of the installation procedure, please refer to go.dfi.com/EC700-BT or scan the QR code
on the right.
• EC700-BT System Unit
• Screw pack for SATA drive installation
• Screw pack for Mini PCIe installation
Status LED
HDMI
USB 3.0
Reset
Antenna
Hole
COM 3
VGA*
COM 1
COM 2
Antenna
Hole
USB 2.0
LAN 1 LAN 2
www.dfi.com
COM 4/8-bit DIO
Antenna
HDD LED
Hole
DC-in
Grounding
1
Advertisement
Related Manuals for DFI EC700-BT
Summary of Contents for DFI EC700-BT
- Page 1 This port can be in VGA or DVI-I. DFI reserves the right to change the specifications at any time prior to the product's release. This QIG may be based on editions that do not resemble your actual products. For the latest revision and more details of the installation procedure, please refer to go.dfi.com/EC700-BT or scan the QR code...
- Page 2 Installing a 2.5" SATA Drive 1. Locate the SATA drive bay on the system board. Unplug the SATA power and data cable, and remove the 4 mounting screws that secure the HDD bracket to the system board. SATA data cable SATA power cable SATA drive bay Mounting Screws (4x)
- Page 3 3. Place the SATA drive with the HDD bracket back into the chassis. Secure the SATA drive bay with the mounting screws you removed in step 1. Then connect the SATA data and power cable to the connectors on the system board. SATA power cable SATA power connector Mounting Screw...
- Page 4 Board Layout and Jumper Settings COM 3 JP22 (JP20) (JP18) Battery (JP17) (JP22, JP21) COM 4/DIO Select Chassis Digital I/O 4-7 Output State (JP18) Intrusion (JP21) Digital I/O 0-3 Output State (JP20) Digital I/O Power Select (JP17) Intel Atom Buzzer COM 4 Clear CMOS Flash...