Advertisement
Installing a 2.5" SATA Drive
1. Locate the SATA drive bay on the system board. Unplug the SATA power and data cable, and
remove the 4 mounting screws that secure the HDD bracket to the system board.
SATA drive bay
2. Connect the SATA cable to the SATA drive first before affixing the SATA HDD on the bracket. Align
the mounting holes of the SATA drive with the mounting holes on the HDD bracket and use the 3
provided mounting screws to secure the drive in place. Note that you should install the drive by
affixing only 3 screws to the desired screw holes indicated in the picture below.
3
No
Screw
Quick Installation Guide |
2.5" SATA drive
Mounting Screw
SATA data cable
SATA power cable
Mounting Screws (4x)
Mounting Screws (3x)
2
1
2
Advertisement
