Setting The Timer To Turn One Cooking Zone Off - Candy CIDSCS633TT/1 Instruction Manual

5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will bips for 30 seconds and the timer
indicator shows "- - " when the setting time
finished.

Setting the timer to turn one cooking zone off

Cooking zones set for this feature will:
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 1#)
2. Touch timer control , The minder indicator
will start flashing and "00" will show in the
timer display.
3. Set the time by touching the "-" or "+" control
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.
To cancel the timer, touch the heating zone selection control, and then touch
the "-" of timer and scrolling down to "0", the timer is cancelled, and the "00" will
show in the minute display, and then "--".
.
EN-19
6.
When cooking timer expires, the corresponding cooking zone will be
automatically switch off and show "H".
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone
off
1. If use this function to more than one heating zone, the timer indicator will show
the shortest time.
(e.g. zone 1# setting time of 2 minutes, zone 2# setting time of 5 minutes,
the timer indicator shows "2".)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating
zone selection control. The timer will indicate its set time.
(set to 5 minutes)
(set to 2 minutes)
2. When cooking timer expires, the corresponding heating zone will be
automatically switch off and show "H".
NOTE: If you want to change the time after the timer is set, you have to start
from step 1
EN-20