Table of Contents
Advertisement
Available languages
Available languages
for various power levels are shown in the below table:
1
2
Power level
8
8
Default working timer
(hour)
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before
using this unit.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not
selecting any cooking zone.
2. Touch "-' or "+" of the timer control, the minder indicator will
start flashing and "00" will show in the timer display.
3. Set the time by touching the "-" or "+"
Hint: Touch the "-" or "+" control once to decrease or increase by 1 minute.
Hold the "-" or "+" control of the timer to decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. Cancel the time by touching the "-" of timer and scrolling down to "0".
3
4
5
6
7
8
9
8
4
4
4
2
2
2
control,
EN-19
5.
When
the
A
II
The display will show the remaining time
indicator will flash for 5
2
2
6.
Buzzer will bips for 30 seconds and the timer indicator
shows "
-
-
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1.
Touching the slider of the heating zone that you want to set
the timer
for.
2. Touch "-' or "+" of the timer control, the minder indicator
will start flashing and "00" will show in the timer display.
3.
Set the time b
Hint: Touch the "
Touch and hold the "
minutes.
If the setting time exceeds 99 minutes, the timer
minute.
4.
To
cancel
- '
' or '+'of "Timer", the timer is cancelled, and the "00" will show in the minute
display, and then
5.
When
the
The
display
flash for 5
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
time
is
set,
it
will
begin
to
count
down
and
seconds.
" when the setting time
finished.
y touching the "
-
" or "+"
control.
-
" or "+" control once will decrease or increase by 1 minute.
-
" or "+" control, the timer will decrease or increase by 10
the
timer,
touch
the
slider
of
the
"
--
".
time
is
set,
it
will
begin
to
count
will
show
the
remaining
time
and
seconds.
EN
-
20
immediately.
the timer
will automatically return to 0
selection
control,
and
then
touch
the
down
immediately.
the
timer
indicator
Advertisement
Table of Contents
