1 . To install 6" Leg Accessory (item# 00956318), tilt or lay base stand
on side and screw each leg into stand (Fig . 6) .
2 . Remove four plastic, thread-protecting plugs from bottom of
dispenser .
3 . Attach dispenser to base stand with supplied hardware (Fig . 7) .
NOTICE!
If installing optional Drip Tray Drain Kit, refer to instructions
included with the Drip Tray Drain Kit.
4 . Place chiller/carbonator unit on floor in front of dispenser .
5 . Follow the Final Connections instructions for countertop models that
follows .
Sparkling Water and Ice Dispenser 7CI100A/7FS100A, 15CI100A/15FS100A
Fig . 6
Fig . 7
X4
13