11
SERVICE WORK ON THE CHASSIS
11.9
Removing the lower triple clamp
11.10
Installing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove the front fender. (
–
Remove the handlebar cushion.
Main work
–
Remove the holder with FI warning lamp.
–
Open cable holder
–
Remove screw
–
Remove screw
–
Remove the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
S01211-10
Do not kink the cables and lines.
–
Remove O-ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
S01212-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether upper steering head seal
–
Slide on protective ring
102146-10
(
p. 73)
(
p. 40)
p. 44)
p. 45)
1
on the left and detach the wiring harness.
2
.
3
.
4
. Remove protective ring
p. 111)
1
2
3
and O-ring
p. 38)
5
.
is correctly positioned.
.
41