KTM 350 SX F 2017 Owner's Manual page 83

14 ELECTRICAL SYSTEM
Main work
(All SX‑F models)
–
Pull starter relay
F00136-10
–
Take off protection caps
–
Remove faulty main fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
–
Check that the electrical equipment is functioning properly.
–
Mount the protection caps.
F00135-10
–
Mount the starter relay onto the holder and route the cable.
(XC‑F US)
–
Pull starter relay
F00161-10
–
Take off protection caps
–
Remove faulty main fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
–
Check that the electrical equipment is functioning properly.
F00162-10
1
from the holder.
2
.
3
.
Info
You can recognize a defective fuse by a burned-out fuse wire
4
A spare fuse is located in the starter relay.
p. 104)
Tip
Insert a spare fuse so that it is available if needed.
Tip
Insert a spare fuse so that it is available if needed.
1 from the holder.
2
.
3
.
Info
You can recognize a defective fuse by a burned-out fuse wire
4
A spare fuse is located in the starter relay.
p. 104)
Tip
Insert a spare fuse so that it is available if needed.
Tip
Insert a spare fuse so that it is available if needed.
81
A
.
A
.