Table of Contents
Advertisement
OVEN OPERATION
The user should be familiar with the following general operational guidelines before using
the oven or attempting more advanced programming.
Ready Mode
1. When the oven is first connected to power for the first time the display will show "——".
2. Open and close the door to enter Ready Mode. The display will show "READY"
3. The oven fan and light will continue to run and the oven is now ready to use.
Power Save Mode
1. If the oven remains idle in Ready Mode or a cooking/heating cycle is paused for 60
seconds*, the oven will automatically enter Power Save Mode.
2. The oven display will be blank and the light will turn off.
3. To end Power Save Mode open and close the oven door.
* The user can change the amount of time taken for the oven to enter Power Save Mode by
following the Custom User Settings guidelines on page 10.
Door Opening Modes
Opening the oven door during a cooking/heating cycle will stop the oven timer and the oven
will display "DOOR OPEN" followed by the remaining cooking/heating time.
(The user can enable the Door Reset Option by following the Custom User Settings
guidelines on page 10. In this instance when the door is opened mid cooking/heating cycle
the display will be cleared. Close the door to then enter Ready Mode.)
5
Advertisement
Table of Contents
