Table of Contents
Advertisement
OVEN OPERATION
The user should be familiar with the following general operational guidelines before using
the oven or attempting more advanced programming.
Ready Mode
1. When the oven is connected to power for the first time the display will show "———".
2. Press the STOP/CLEAR button to clear the display. The oven is now in Power Save
Mode and ready for use.
Power Save Mode
1. If the oven remains idle for 60 seconds* the oven will enter Power Save Mode. In Power
Save Mode the oven display will be blank and the light will turn off.
2. Opening and closing the oven door will exit the Power Save Mode and the oven will be
ready for use. The display will now show "READY".
*The user can change the amount of time taken for the oven to enter Power Save Mode by
following the Custom User Settings guidelines on Page 10.
Door Opening Modes
Opening the oven door during a cooking/heating cycle will stop the oven timer and the oven
will display "DOOR OPEN" followed by the remaining cooking/heating time.
(The user can enable the Door Reset Option by following the Custom User Settings
guidelines on page 10. In this instance when the door is opened mid cooking/heating cycle
the display will be cleared. Close the door to then enter Ready Mode.)
5
Advertisement
Table of Contents
