Changing Custom User Settings; Restoring Factory Default Settings - Anvil MWA2100 Installation, Operation And Care Manual

Commercial microwave oven
Table of Contents

Advertisement

OP:00
0
OP:01
Air Filter
Cleaning
OP:02
Reminder
OP:03

CHANGING CUSTOM USER SETTINGS

1. Ensure oven is in Ready mode. (Display will show "READY")
2. Open the oven door, then press and hold button number 2 for 5 seconds.
(The oven will beep once and display "OP:—").
3. Using numbers 1 to 0, enter the Option Number shown in the table above that matches
the desired user setting (The oven will display the current selection).
4. Continue pressing the same number button selected in point three above to scroll
through the display settings until the desired option is reached.
5. Press Start to save the chosen setting. (The oven will display "OP:—).
6. Close the oven door. The oven is now ready to use.
Example; To change the air filter cleaning reminder to every seven days. (Custom User
Option Setting Number OP:01)
1. Open the oven door, then press and hold number button 2 for 5 seconds. (The oven will
beep once and display the current selection)
2. Press number 0 repeatedly to scroll through the display settings until the desired option
is shown (OP:01), ie; OP:03 > OP:00 > OP:01
3. Press Start button. (Oven will display OP:— )
4. Close oven door. The oven is now ready for use.

RESTORING FACTORY DEFAULT SETTINGS

To return the oven to its original factory default settings follow the following sequence.
1. Ensure oven is in Ready mode. (Display will show "READY")
2. Press and hold "START" and "0" buttons at the same time. (The oven will beep once, the
oven will display "CHECK".) The oven will then start inspection.
3. If the oven is already in default settings the display will show "11" and then return to
Ready mode after 3 seconds.
4. If the oven is not in its default settings the oven display will show "00". Press "START" to
restore factory default settings.
5. After 10 seconds the display shows "CLEAR" and will beep once.
6. The oven will then start self inspection and display "11". After 3 seconds the oven will
return to Ready mode.
Disabled
Every 7 days
User can choose time interval to next
reminder notice in display
Every 30 days
Every 90 days
11

Advertisement

Table of Contents
loading

Table of Contents