Manual Heating; Multi-Stage Cooking - Anvil MWA2100 Installation, Operation And Care Manual

MANUAL HEATING

The user can manually select time and power level. Follow the sequence below.
1. Ensure the oven is in Ready mode. (Display will show "READY")
2. Press "Time Entry". (The oven will display "00:00")
3. Using buttons 1-0 enter desired time.
(The oven limits the maximum cooking/heating time possible at 60 minutes or 10
minutes depending on the chosen Custom User Setting. Factory default setting is 10
minutes but can be changed following the guidelines in the Custom User Settings on
page 10)
4. Press "POWER LEVEL". (The oven will display "%POWER" defaulting to 100% power).
5. If power level required is less than 100%, using buttons 1-0 select percentage power. Ie
press button 7 for 70% power.
6. Press "START" to commence cooking/heating.
Note: If power level selected is 100% the oven display will not show power level.

MULTI-STAGE COOKING

Multi-Stage function assists heating/cooking of dense or frozen foods such as lasagne that
are difficult to achieve with single stage heating/cooking. Multi-Stage cooking/heating can be
used either manually or within a Preset Memory (Page 8).
1. Ensure the oven is in Ready mode. (Display will show "READY")
2. Press "Time Entry". (The oven will display "00:00")
3. Using buttons 1-0 enter desired time.
(The oven limits the maximum heating/cooking time possible at 60 minutes or 10
minutes depending on the chosen Custom User Setting. Factory default setting is 10
minutes but can be changed following the guidelines in the Custom User Settings on
page 10)
4. Press "POWER LEVEL". (The oven will display "%POWER" defaulting to 100% power).
5. If power level required is less than 100%, using buttons 1-0 select percentage power. Ie
press button 7 for 70% power.
6. Press "Time Entry". (The oven will display "STAGE-2")
7. Using buttons 1-0 enter desired time for stage 2.
8. Press "POWER LEVEL". (The oven will display "%POWER" defaulting to 100% power).
9. If power level required for stage 2 is less than 100%, using buttons 1-0 select
percentage power. Ie press button 7 for 70% power.
10. Press "START" to commence heating/cooking.
After the completion of Stage 1 the oven will beep twice and display the time and power
level of Stage 2.
Note: If power level selected is 100% the oven display will not show power level.
6