Changing Preset Memory Settings; Double/Triple Quantity Function - Anvil MWA2100 Installation, Operation And Care Manual

CHANGING PRESET MEMORY SETTINGS

The user can change any preset memory time and power level as required. Follow the
sequence below to change a preset memory.
1. Ensure the oven is in Ready mode. (Oven displays "READY")
2. Open the oven door, press and hold button number 1 for 5 seconds. (The oven will beep
and the oven will display "PROGRAM")
3. Using buttons 1-0 select Preset Memory number. (The oven display will briefly display
"OP:0X", followed by the existing preset memory time.)
4. Using button numbers 1-0 enter the desired heating/cooking time.
(The oven limits the maximum heating/cooking time possible at 60 minutes or 10
minutes depending on the chosen Custom User Setting. Factory default setting is 10
minutes but can be changed following the guidelines in the Custom User Settings on
page 10)
5. Press Power Level button.
6. Using buttons 1-0 select desired power level. ie. Press 8 for 80% or 0 for 100%.
7. Press START to save settings. (The oven display shows "PROGRAM")
8. Close oven door. Oven returns to Ready mode and displays "READY"

DOUBLE/TRIPLE QUANTITY FUNCTION

When using Preset Memory Programs the user can use this function when double or triple
quantity portions are to be heated.
1. Ensure oven is in Ready mode.
2. Select "x2" or "x3" (The oven display will display either "Double" or "Triple")
3. Using buttons 1-0 select the desired preset memory to suit the menu item.
4. Cooking/Reheating time will be doubled or tripled accordingly.
(The "x2" or "x3" buttons can also be pressed within 5 seconds after selecting the preset
memory to double or triple the selected heating time.)
9