Preset Memory Function - Anvil MWA2100 Installation, Operation And Care Manual

PRESET MEMORY FUNCTION

The oven allows up to 100 customisable preset memories*. This enables fast and consistent
cooking/heating of common menu items without the need to enter time and power level. To
use a preset memory follow the sequence below.
1. Ensure the oven is in Ready Mode. The oven display shows "Ready"
2. Open the oven door and position menu item in the oven, close door.
3. Using button numbers 1-0, enter the preset memory number.
4. The oven will start immediately according to the time and power programmed in the
preset memory.
(Note. If the user has selected the incorrect preset memory and Custom User Setting OP:51
is enabled, the user can immediately select the correct preset memory without having to
stop and cancel the initial cooking/heating cycle. See page 10 for Custom User Settings.)
* Depending on the chosen Custom User Settings (page 10), the oven can be setup to
operate with 10 or 100 preset memories. The factory default setting is 10 preset memories.
(The benefit of being in the default user setting of 10 preset memories is faster user
operation.)
Factory Default Preset Memory Settings
The oven is supplied new with default preset program times and power as shown
in the table below.
Button
1
2
3
4
5
6
7
8
9
0
Display (Time)
0:10
0:20
0:30
0:45
1:00
1:30
2:00
2:30
3:00
3:30
8
Power
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%