Custom User Settings; Changing Custom User Settings; Restoring Factory Default Settings - Anvil MWA1800 Installation, Operation And Care Manual

CUSTOM USER SETTINGS

The oven allows the user to customise select operating parameters that best suit the users
requirements. The chart below lists the various custom settings that the user can select from.
Items in bold are the default values.
Option Display
Description
Number Setting
OP:10 3 seconds beep
1
End of Timer OP:11 Continuous beep
Beep
OP:12 5 quick beeps repeating
OP:20 Off
OP:21 Low
2
Beep Volume
OP:22 Medium
OP:23 High
3 OP:30 Off
Touchpad
Beep
OP:31 On
OP:40 15 seconds
4 OP:41 30 seconds
Power Save
Mode
OP:42 60 seconds
OP:43 120 seconds
5 OP:50 Disabled
On The Fly
Preset Usage
OP:51 Enabled
OP:60 Disabled
6
Door Reset
OP:61 Enabled
7
OP:70 60 Minutes
Maximum
Cooking/
OP:71 10 Minutes
Heating Time
OP:80 Disabled
8
Manual Oven
Use Lockout
OP:81 Enabled
OP:90 10 programs
9
Preset Memory
Quantity
OP:91 100 programs
10
Changes the beep sound at the end of
each cooking/heating cycle
Changes the volume of the oven beep
Turns on/off the oven beep when pressing
touchpad buttons
Changes the length of time before the
display enters power save mode. Ie Empty
display
Allows the user to change preset memory
during cycle if the incorrect preset was
initially selected
Clears current cooking/heating cycle and
returns the oven to Ready Mode when the
door is opened and closed during timer
countdown
Changes the maximum possible cooking
time of the oven
Locks/Unlocks oven usage to preset
memory settings only
Oven memory presets can be changed
between 10 or 100 preset memory choices
OP:00 Disabled
0
OP:01 Every 7 days
Air Filter
Cleaning
OP:02 Every 30 days
Reminder
OP:03 Every 90 days

CHANGING CUSTOM USER SETTINGS

1. Ensure oven is in Ready mode. (Display will show "READY")
2. Open the oven door, then press and hold button number 2 for 5 seconds.
(The oven will beep once and display "OP:—").
3. Using numbers 1 to 0, enter the Option Number shown in the table above that matches
the desired user setting (The oven will display the current selection).
4. Continue pressing the same number button selected in point three above to scroll
through the display settings until the desired option is reached.
5. Press Start to save the chosen setting. (The oven will display "OP:—).
6. Close the oven door. The oven is now ready to use.
Example; To change the air filter cleaning reminder to every seven days. (Custom User
Option Setting Number OP:01)
1. Open the oven door, then press and hold number button 2 for 5 seconds. (The oven will
beep once and display the current selection)
2. Press number 0 repeatedly to scroll through the display settings until the desired option
is shown (OP:01), ie; OP:03 > OP:00 > OP:01
3. Press Start button. (Oven will display OP:— )
4. Close oven door. The oven is now ready for use.

RESTORING FACTORY DEFAULT SETTINGS

To return the oven to its original factory default settings follow the following sequence.
1. Ensure oven is in Ready mode. (Display will show "READY")
2. Press and hold "START" and "0" buttons at the same time. (The oven will beep once, the
oven will display "CHECK".) The oven will then start inspection.
3. If the oven is already in default settings the display will show "11" and then return to
Ready mode after 3 seconds.
4. If the oven is not in its default settings the oven display will show "00". Press "START" to
restore factory default settings.
5. After 10 seconds the display shows "CLEAR" and will beep once.
6. The oven will then start self inspection and display "11". After 3 seconds the oven will
return to Ready mode.
11
User can choose time interval to next
reminder notice in display