Preset Memory Function; Changing Preset Memory Settings; Double/Triple Quantity Function - Anvil MWA1800 Installation, Operation And Care Manual

PRESET MEMORY FUNCTION

The oven allows up to 100 customisable preset memories*. This enables fast and consistent
cooking/heating of common menu items without the need to enter time and power level. To
use a preset memory follow the sequence below.
1. Ensure the oven is in Ready Mode. The oven display shows "Ready"
2. Open the oven door and position menu item in the oven, close door.
3. Using button numbers 1-0, enter the preset memory number.
4. The oven will start immediately according to the time and power programmed in the
preset memory.
(Note. If the user has selected the incorrect preset memory and Custom User Setting OP:51
is enabled, the user can immediately select the correct preset memory without having to
stop and cancel the initial cooking/heating cycle. See page 10 for Custom User Settings.)
* Depending on the chosen Custom User Settings (page 10), the oven can be setup to
operate with 10 or 100 preset memories. The factory default setting is 10 preset memories.
(The benefit of being in the default user setting of 10 preset memories is faster user
operation.)
Factory Default Preset Memory Settings
The oven is supplied new with default preset program times and power as shown
in the table below.
Button Display (Time)
1 0:10
2 0:20
3 0:30
4 0:45
5 1:00
6 1:30
7 2:00
8 2:30
9 3:00
0 3:30
Power
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
8

CHANGING PRESET MEMORY SETTINGS

The user can change any preset memory time and power level as required. Follow the
sequence below to change a preset memory.
1. Ensure the oven is in Ready mode. (Oven displays "READY")
2. Open the oven door, press and hold button number 1 for 5 seconds. (The oven will beep
and the oven will display "PROGRAM")
3. Using buttons 1-0 select Preset Memory number. (The oven display will briefly display
"OP:0X", followed by the existing preset memory time.)
4. Using button numbers 1-0 enter the desired heating/cooking time.
(The oven limits the maximum heating/cooking time possible at 60 minutes or 10
minutes depending on the chosen Custom User Setting. Factory default setting is 10
minutes but can be changed following the guidelines in the Custom User Settings on
page 10)
5. Press Power Level button.
6. Using buttons 1-0 select desired power level. ie. Press 8 for 80% or 0 for 100%.
7. Press START to save settings. (The oven display shows "PROGRAM")
8. Close oven door. Oven returns to Ready mode and displays "READY"

DOUBLE/TRIPLE QUANTITY FUNCTION

When using Preset Memory Programs the user can use this function when double or triple
quantity portions are to be heated.
1. Ensure oven is in Ready mode.
2. Select "x2" or "x3" (The oven display will display either "Double" or "Triple")
3. Using buttons 1-0 select the desired preset memory to suit the menu item.
4. Cooking/Reheating time will be doubled or tripled accordingly.
(The "x2" or "x3" buttons can also be pressed within 5 seconds after selecting the preset
memory to double or triple the selected heating time.)
9