BGT60ATR24C ES shield
XENSIV™ 60 GHz radar system platform
Measurement results
6
Measurement results
6.1
Transmitter and receiver antenna matching
The antennas of this shield have been designed on a 0.4 mm Rogers RO4350B laminate substrate. This is a
thicker substrate, when compared to the 0.127 mm thick substrate used for the top layer, it allows higher
antenna bandwidths to be supported. All measurements include the feed-throughs from the top layer.
The achieved bandwidth here is over 4 GHz. The antennas' center frequency is shifted to higher frequencies but
can be moved to the center of the BGT60ATR24C MMIC's frequency band by fine tuning.
Figure 19
Measured RX antenna matching, including feed-throughs
Figure 20
Measured TX antenna matching, including feed throughs
Application note
13
Revision 1.10
2023-02-14