Table of Contents
Advertisement
10 Service, maintenance, disposal
10.1 Cleaning
Before cleaning, disconnect the appliance from the operating voltage.
Please do not use aggressive cleaning agents (solvents or similar agents), but a
cloth dampened with mild soap suds. Take care that the device is not penetrated by
fluids and polish it with a dry soft cloth.
Loose residue sample/powder can be removed carefully with a brush or manual
vacuum cleaner.
Remove spilled weighing goods immediately.
10.2 Service, maintenance
The appliance may only be opened by trained service technicians who are
authorized by KERN.
Before opening, disconnect from power supply.
10.3 Disposal
Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.
11 Error messages, troubleshooting guide
Error message
LO
ERRE
ErrEd
Err
ErrL
24
Function
Capacity of batteries exhausted
EEPROM error display unit
EEPROM error
Overload
Minimum weight under min. value
EOB/EOE_L/EOE_XL/EOS-BA-e-1633
Advertisement
Table of Contents
