Installing Power Supplies - Alcatel-Lucent OmniSwitch 6860N Hardware User's Manual

Chassis and Power Supplies

Installing Power Supplies

Note. The power supply shown in the following diagrams is a OS6860-BP-PH/OS6860-BP-PX unit.
However, comparable installation and removal steps also apply to OS6860-BP and OS6860-BP-D power
supply units, as well as the OS6860 FANTRAY NONPOE Fan Tray (see
Insert the power supply into a power supply bay at the rear of the chassis and slide it back until it is
1
securely seated in the chassis backplane.
When the connector is fully seated, the lock tab will click and hold the power supply in place.
OmniSwitch 6860 Hardware Users Guide October 2022
Power Supplies
page 3-61).
Lock Tab
page 3-55