Chassis Status Leds - Alcatel-Lucent OmniSwitch 6860N Hardware User's Manual

Chassis and Power Supplies

Chassis Status LEDs

The chassis provides a series of status LEDs located on the front panel. These LEDs offer basic status
information for hardware operation and port link and activity status.
LED
OK1
VC
PS
BPS
GRN
OmniSwitch 6860 Hardware Users Guide
State
Solid Green
Blinking Green
Solid Amber
Solid Green
Solid Amber
Off
Solid Green
Solid Green
Solid Amber
Solid Amber
Off
Solid Green
Solid Amber
Off
Solid Green
Off
October 2022
OmniSwitch 6860 Chassis Details
Description
System Diagnostics and AOS bootup OK
System Diagnostics and AOS in progress
(i.e., performing diagnostics or booting)
System Diagnostics and/or AOS bootup failed
This unit is the master unit
This unit is a slave unit
This unit is in shutdown mode or is not part of
a VC.
Two power supplies are installed in the chassis
and both supplies are functioning normally.
One power supplies is installed in the chassis
and functioning normally (with the second
power supply bay empty or occupied by a
fan tray).
Two power supplies are installed in the chassis
and one or both supplies has experienced
a failure.
One power supply is installed in the chassis
and has experienced a failure (with the second
power supply bay empty or occupied by a
fan tray).
No power supply is present.
Backup power supply is operating normally
Backup power supply is operating, but a fault
is present
No backup power supply is present
Power save features are active
Power save features are off
page 3-35