Explanatory Diagram; The Titan Plug 'N' Spray System; Disassembly Of The Spray Gun - Titan Focus 500 Operating Manual

GB
EXPLANATORY DIAGRAM/ PLUG 'N' SPRAY SYSTEM
2
EXPLANATORY DIAGRAM (FIG. 1)
POS. DESIGNATION
1 Nozzle
2 Air cap
3 Spray jet width adjusting lever (shaping air)
4 Spray jet level adjusting ring (vertical/horizontal)
5 Union nut
6 Spray attachment complete
7 Material volume regulation
8 Fixture for shoulder strap
9 Air filter cover lock
10 Air filter cover
11 Air volume control
12 Power cable
13 PLUG 'N' SPRAY catch
14
Trigger (actuates turbine starting switch
conveyed)
3

THE TITAN PLUG 'N' SPRAY SYSTEM

With the Titan PLUG 'N' SPRAY System, the front part of the gun (spray attachment) can be replaced quickly and easily.
This enables a rapid material change without cleaning, and ensures that the right tool is available for every material and applica-
tion.
The following spray attachments are available:
Spray attachment
MultiFinish (red)
Order No. 2335 658
FineFinish (brown)
Order No. 2335 657
WallFinish (white)
Order No. 2335 659
3.1

DISASSEMBLY OF THE SPRAY GUN

For assembly, insert the spray attachment into the Focus 500 so that the two arrows point at each other.
Turn the Focus 500 90° in the arrow direction until it audibly engages. (Fig. 2)
To remove the spray attachment, push the catch (Fig. 2, A) beneath the trigger down and turn the spray attachment by 90°.
16
material is
Area of application
Spray attachment with slit nozzle and 1000 ml stainless steel container. Processes all standard
paints.
Spray attachment with round nozzle and 1000 ml stainless steel container. Ideal for low-viscosity
paints and glazes.
Dispersion spray attachment with slit nozzle and 1400 ml plastic container. Designed for processing
dispersions and latex paint.
POS. DESIGNATION
15 Container
16 Suction tube
17 Container seal
18 Valve
19 Ventilating hose
20 Cleaning brush
21 Fine feed tube filter (red)
Coarse feed tube filter (white)
22 Funnel (3 pcs.)
23 Replacement air filter (3 pcs.)
24 Carrying strap (for device and transport case)
25 Transport case
26 Velcro to secure the power cable
Focus 500