Table of Contents

Advertisement

Available languages

Available languages

PowrLiner 850
Model Number
0290005
Register your product online at:
www.titantool.com
_ _ _ _ _ _ _ _ _ _
Serial Number
SPEEFLO
Owner's Manual
Notice d'utilisation
Manual del Propietario
Do not use this equipment before
reading this manual!
NOTE: This manual contains important
warnings and instructions. Please read
and retain for reference.
© Titan Tool Inc. All Rights Reserved. Form No. 0293747J
0215

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPEEFLO PowrLiner 850 and is the answer not in the manual?

Questions and answers

Summary of Contents for Titan SPEEFLO PowrLiner 850

  • Page 1 Register your product online at: www.titantool.com NOTE: This manual contains important warnings and instructions. Please read and retain for reference. _ _ _ _ _ _ _ _ _ _ Serial Number © Titan Tool Inc. All Rights Reserved. Form No. 0293747J 0215 •...
  • Page 2: Safety Instructions

    3. Always use the nozzle tip guard. Do not spray without the effective footing and balance at all times. nozzle tip guard in place. 5. Stay alert and watch what you are doing. English © Titan Tool Inc. All rights reserved.
  • Page 3: Table Of Contents

    To avoid severe burns or fire hazards, let the engine cool before transporting it or storing it indoors. 11. Never ship/transport unit with gasoline in the tank. English © Titan Tool Inc. All rights reserved.
  • Page 4: General Description

    If you notice any undesirable operating characteristics while using a gasoline that contains alcohol, or one that you think contains alcohol, switch to a gasoline that you know does not contain alcohol. English © Titan Tool Inc. All rights reserved.
  • Page 5: Operator Controls

    Operating this unit lubrication to the fluid section of the without fluid will cause unnecessary wear to the pump. After initial setup, press the packings. AutoOiler button 2-3 times before each use. English © Titan Tool Inc. All rights reserved.
  • Page 6: Preparing To Paint

    Once the engine is running, slowly rope move the choke lever down to the closed position. NOTE: If you are having trouble starting the motor, rotate the DirectLink pressure control knob 1-2 turns counter-clockwise. English © Titan Tool Inc. All rights reserved.
  • Page 7: Painting

    19. Release the spray lever. 20. Lock the gun by turning the gun trigger lock to the locked position. If necessary, loosen the gun holder clamp knob and English © Titan Tool Inc. All rights reserved.
  • Page 8: Pressure Relief Procedure

    2. To lock the wheel back into place, pull the handle down. Once the front wheel is turned straight again, the wheel will lock back into place. English © Titan Tool Inc. All rights reserved.
  • Page 9: Cleanup

    Saver™ through the entire system. 17. Follow the “Pressure Relief Procedure” found in the Operation section of this manual. 18. Store the sprayer in a clean, dry area. ImPORTANT: Do not store the sprayer under pressure. English © Titan Tool Inc. All rights reserved.
  • Page 10: Cleaning/Replacing The Gun Filter

    Fitting Always contact the supplier of solvents for recommendations. 4. If you have any further questions concerning your TITAN Airless Sprayer, call TITAN: NOTE: Never poke the filter with a sharp instrument! Technical Service (U.S.) ........
  • Page 11: Adjusting The Trigger Tension

    Make sure the knob is pushed completely onto to the cam (the knob should cover the cam NOTE: The safety shut-off switch should be set to shut completely). down the sprayer between 3200 – 3300 PSI. English © Titan Tool Inc. All rights reserved.
  • Page 12: Servicing The Fluid Section

    8. Install the yoke screw and washer to secure the dowel pin. 9. Turn pump right side up and apply a few drops of Piston Lube or light household oil between the top nut and piston. This will prolong the seal life. English © Titan Tool Inc. All rights reserved.
  • Page 13 Dowel Piston/seal assembly Ball guide DO NOT attempt Outlet ball to remove the seals from the piston. Outlet seat Outlet valve O-ring Inlet ball Sure o Valve Inlet O-ring assembly Inlet seat English © Titan Tool Inc. All rights reserved.
  • Page 14: Troubleshooting

    The material being sprayed is too viscous. Add solvent to the material according to the manufacturer’s recommendations. The unit lacks power. The pressure adjustment is too low. Take to an authorized service center. English © Titan Tool Inc. All rights reserved.
  • Page 15 Notes English © Titan Tool Inc. All rights reserved.
  • Page 16: Consignes De Sécurité

    4. Utilisez exclusivement un embout de buse spécifié par le 5. Soyez attentif et regardez ce que vous faites. fabricant. Français © Titan Tool Inc. Tous droits réservés.
  • Page 17: Spécifications

    Accessoires ..................53 démarrer le moteur. Enregistrement du produit ............54 • Ne faites jamais fonctionner le moteur dans un endroit fermé Garantie ..................54 ou confiné. Les fumées d’échappement contiennent du Français © Titan Tool Inc. Tous droits réservés.
  • Page 18: Description Générale

    91 ou plus. L’utilisation d’un carburant avec un indice d’octane inférieur peut provoquer des « cliquetis » ou des « détonations » fortes (martèlement métallique) qui peuvent à leur tour endommager le moteur. Français © Titan Tool Inc. Tous droits réservés.
  • Page 19: Commandes De L'opérateur

    à la section des liquides L’utilisation de l’appareil sans liquide peut user de la pompe. Après le montage initial, prématurément les garnitures. appuyer sur le bouton de l’AutoOiler deux ou trois fois avant chaque utilisation. Français © Titan Tool Inc. Tous droits réservés.
  • Page 20: Préparation Avant De Peindre

    2. Placer le tube-siphon dans un contenant de peinture. DirectLink 1-2 tours dans le sens antihoraire. 3. Placer le tuyau de retour dans un contenant de vidange en métal. Français © Titan Tool Inc. Tous droits réservés.
  • Page 21 21. Tourner le bouton de régulation de la pression de Direct-Link complètement dans le sens horaire au minimum. 22. Mettre la soupape PRIME/SPRAY à la position PRIME. Français © Titan Tool Inc. Tous droits réservés.
  • Page 22: Procédure De Décompression

    2. Pour verrouiller la roue, tirer la poigner vers le bas. Une fois que la roue avant est à nouveau droite, la roue se verrouillera en place. Français © Titan Tool Inc. Tous droits réservés.
  • Page 23: Nettoyage

    17. Suivre la Procédure de décompression à la section Fonctionnement du présent manuel. 18. Débrancher l’appareil et le ranger dans un endroit propre et sec. ImPORTANT : Ne pas ranger l’appareil sous pression. Français © Titan Tool Inc. Tous droits réservés.
  • Page 24: Nettoyage/Remplacer Du Filtre Du Pistolet

    être correctement insérée, à défaut de quoi le 4. Pour toute autre question relative à ce vaporisateur à buse pourrait s’obstruer et le produit, cesser de s’écouler du dépression, il suffit de communiquer avec Titan : pistolet. Service à la clientèle (É.-U.) ....1-800-526-5362 6.
  • Page 25: Régler La Tension De La Détente

    Languette sur la le filtre chaque jour et le remplacer au besoin. (Les pièces de came à la position 12 h remplacement sont offerts chez le distributeur local de Titan.) NOTA : Positionner la came sur Languette l’écrou hexagonal afin •...
  • Page 26: Maintenance De La Section Des Liquides

    5. Aligner le piston avec la chape. Prendre soin de ne pas endommager le piston. 6. Appliquer n’importe quel type de graisse de ménage sans silicone au piston et au bloc de bobinage afin de prolonger la Français © Titan Tool Inc. Tous droits réservés.
  • Page 27 / joint refoulement NE PAS retirer les Bille joints du piston. Siège Soupape de sortie Joint torique Bille de entrée Ensemble de soupape de Joint torique Sure o de entrée Siège de entrée Français © Titan Tool Inc. Tous droits réservés.
  • Page 28: Dépannage

    Le produit vaporisé est trop visqueux. Ajouter du solvant au produit selon les recommandations du fabricant. L’outil n’est pas pouvoir. Le réglage de la pression est trop faible. Faire réparer dans un centre d’entretien agrée par Titan. Français © Titan Tool Inc. Tous droits réservés.
  • Page 29 Notas Français © Titan Tool Inc. Tous droits réservés.
  • Page 30 1. No apunte con la pistola ni pulverice sobre ninguna persona 2. Lleve protección para los oídos. El aparato puede producir ni animal. niveles de ruido superiores a 85 dB(A). Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 31 Etiquetas ......................52 8. Tenga cuidado de no derramar el combustible. Los gases del Accesorios ..................53 combustible o el combustible derramado pueden encenderse. Registro del producto ..............55 Garantía .....................55 Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 32 91 o más. El uso de una gasolina de menos octanos puede causar un persistente “picado” o “autoencendido” fuerte (un ruido metálico de golpes) que, si es grave, puede llegar a dañar el motor. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 33 3 veces antes de cada uso. ImPORTANTE: Nunca haga funcionar la unidad durante más de diez segundos sin líquido. Si se hace funcionar esta unidad sin líquido, se provocará un desgaste innecesario de las empaquetaduras. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 34 2. Coloque el tubo de sifón en un recipiente con pintura. DirectLink en el sentido contrario al de las agujas del reloj (1-2 rotaciones). 3. Coloque la tubo de retorno en el contenedor de desechos de metal. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 35 21. Gire el regulador de control de presión de DirectLink hacia delante para completamente en el sentido de las agujas del reloj hasta el pulverizar. mínimo. 22. Mueva la válvula PRIME/SPRAY a la posición PRIME. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 36 2. Para asegurar la rueda en su posición original, tire de la manilla hacia abajo. Una vez que la rueda frontal está en posición recta nuevamente, dicha rueda se asegurará en su posición original. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 37 17. Siga el “¨Procedimiento de alivio de presión” de la sección Operación de este manual. 18. Desenchufe la unidad y almacénela en un área limpia y seca. ImPORTANTE: No almacene la unidad bajo presión. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 38 Siempre pida Conector recomendaciones al proveedor de solventes. 4. Si tiene otras preguntas referentes al rociador Titan, llame a Titan: NOTA: Nunca perfore el filtro con un instrumento afilado. Servicio al cliente (EE.UU.) ........ 1-800-526-5362 5.
  • Page 39 Comuníquese con un centro de servicio técnico autorizado si se debe ajustar la configuración. NOTA: El interruptor de corte de seguridad se debe ajustar para apagar el pulverizador entre 220 a 227 bar (3200 a 3300 PSI). Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 40 6. Aplique cualquier tipo de grasa de uso doméstico que no sea a base de silicona al área del pistón y el yugo para prolongar la vida útil. Aplíquelo a los agujeros del yugo donde se inserta la espiga. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 41 Asiento de la válvula de salida Retén de la válvula de salida Junta tórica Bola de entrada Ensamblaje de la válvula de Sure o Junta de entrada Asiento de entrada Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 42 Añada solvente al material de acuerdo con las viscoso. recomendaciones del fabricante. La unidad no tiene El ajuste de la presión es demasiado bajo. Lleve a un centro de servicio autorizado por Titan. alimentación. Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 43 Notas Español © Titan Tool Inc. Todos los derechos reservados.
  • Page 44: Parts Listings

    Parts List • Liste de pièces • Lista de piezas Main assembly • Vue d’ensemble • Ensamblaje principal © Titan Tool Inc. All rights reserved.
  • Page 45: Boîte D'engrenages

    Bouchon de réservoir à essence Conjunto de tapa de la gasolina 0293926 Filter Filtre Filtro 0293927 Filter cover Couvercle de filtre Tapa de filtro * See separate listing * voir liste séparée * Consulte la lista separada © Titan Tool Inc. All rights reserved.
  • Page 46: Drive Assembly

    Drive assembly • Boîte d’engrenages • Ensamblaje de la caja de engranajes © Titan Tool Inc. All rights reserved.
  • Page 47 Throttle nut Écrou de l’étrangleur Tuerca del acelerador 0293944 Throttle cable assembly Ensemble de câbles de l’étrangleur Conjunto del cable del acelerador 759-365 Fluid section repacking kit Trousse de tampon graisseurs Juego de empaquetaduras © Titan Tool Inc. All rights reserved.
  • Page 48: Cart Assembly

    Cart assembly • Ensemble de chariot • Ensamblaje de carro © Titan Tool Inc. All rights reserved.
  • Page 49 Front axle Essieu 0293963 Locking pin Tige de blocage Pasador de seguridad 759-326 Grounding chain Chaînette de mise à la terre Cadena de conexión a tierra 759-440 Washer Rondelle Arandela 759-325 Screw Tornillo © Titan Tool Inc. All rights reserved.
  • Page 50: Gun Holder Assembly

    Screw Tornillo 759-056 Spring holder (short) Support de ressort (court) Portaresorte (corto) 0509781 Spring Ressort Resorte 759-057 Spring holder (long) Support de ressort (long) Portaresorte (largo) 860-936 Screw Tornillo 424-202 Lever Levier Palanca © Titan Tool Inc. All rights reserved.
  • Page 51: Spray Gun

    651-040 Tip seal retainer Joint Sello 759-369 Gun assembly Ensemble de pistolet Ensamblaje de pistola 0515252 Filter, fine (white) Filtre, fin (blanc) Filtro, fino (blanco) 0043590 Spring Ressort Resorte 0278357 Fitting Raccord Conector © Titan Tool Inc. All rights reserved.
  • Page 52: Electrical Schematic

    Etiqueta de “Do not pull cable” 313-2772 Label, gun mount Étiquette, support à pistolet Etiqueta, soporte de la pistola 313-2771 Label, tip size Étiquette, dimension de la buse Etiqueta, tamaño de la boquilla © Titan Tool Inc. All rights reserved.
  • Page 53: Accessories

    Piston Lube décompose tous les matériaux qui risquent de s’accumuler dans la cuvette d’égouttage et les empêchent de sécher. Nº de pièce Description 314-481 Bouteille de 4 oz 314-480 Bouteille de 8 oz © Titan Tool Inc. All rights reserved.
  • Page 54: Enregistrement Du Produit

    Les responsabilités de Titan en vertu de cette garantie se limitent au remplacement ou à la réparation sans frais des pièces dont on aura, à la satisfaction raisonnable de Titan, démontré la défectuosité dans un délai de 24 mois après la date d’achat par l’Utilisateur.
  • Page 55 Titan Tool, Inc., (“Titan”) garantiza que en el momento de la entrega al comprador original para su uso (“Usuario final”), el equipo cubierto por esta garantía está exento de defectos en material y fabricación. La obligación de Titan en virtud de esta garantía se limita a sustituir o reparar sin cargo las piezas que;...
  • Page 56: Product Registration

    Warranty Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge those parts which, to Titan’s reasonable satisfaction,...

This manual is also suitable for:

0290005

Table of Contents