Installation; Required Tools And Materials; Camera Package Contents; Installation Steps - Avigilon 1.0-H3-DC1 Installation Manual

Installation

Required Tools and Materials

• Small slotted screwdriver with 5/64" or 2 mm blade width
- for connecting power when not using Power over
Ethernet.

Camera Package Contents

Ensure the package contains the following:
• Avigilon High Definition IP Dome Camera
• Terminal block
• T20 TORX tamper resistant key
• Hole template sticker

Installation Steps

Complete the following procedures to install the dome camera.
1. Removing the Dome Cover on page 5
2. Mounting the Dome Camera on page 6
3. Connecting Cables on page 7
Assigning an IP Address on page 8
4.
5. Accessing the Live Video Stream on page 8
6. Aiming the Dome Camera on page 8
7. (Optional) Configuring Onboard Storage on page 9
Installing the Dome Cover on page 9
8.
9. Focusing the Dome Camera on page 10

Removing the Dome Cover

Remove the dome cover by loosening the tamper-proof screws that fix
the cover to the base. The tamper resistant key included with the dome
camera can be used to loosen the screws.
NOTE: Be careful not to scratch the dome bubble.
5