Setup With Pactware; Connect The Pc; Parameter Adjustment With Pactware - Vega VEGAFLEX 83 Operating Instructions Manual

Foundation fieldbus polished rod probe

Hide thumbs Also See for VEGAFLEX 83:

Table of Contents

8 Setup with PACTware

Via the interface adapter

directly on the sensor

Prerequisites

Setup with PACTware

8.1

Fig. 24: Connection of the PC directly to the sensor via the interface adapter

1 USB cable to the PC

2 Interface adapter VEGACONNECT

Sensor

8.2

For parameter adjustment of the sensor via a Windows PC, the con-

figuration software PACTware and a suitable instrument driver (DTM)

according to FDT standard are required. The up-to-date PACTware

version as well as all available DTMs are compiled in a DTM Collec-

tion. The DTMs can also be integrated into other frame applications

according to FDT standard.

Note:

To ensure that all instrument functions are supported, you should

always use the latest DTM Collection. Furthermore, not all described

functions are included in older firmware versions. You can download

the latest instrument software from our homepage. A description of

the update procedure is also available in the Internet.

Further setup steps are described in the operating instructions manu-

al " DTM Collection/PACTware" attached to each DTM Collection and

which can also be downloaded from the Internet. Detailed descrip-

tions are available in the online help of PACTware and the DTMs.

VEGAFLEX 83 • Foundation Fieldbus

Table of Contents