Setup With Pactware; Connect The Pc - Vega MINITRAC 31 Installation & Maintenance Instructions Manual

Via the interface adapter
directly on the sensor
Connection via HART
MINITRAC 31 • 4 ... 20 mA/HART - four-wire
7

Setup with PACTware

7.1

Connect the PC

2
1
Fig. 21: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 ">Sensor
Information:
The interface adapter VEGACONNECT 3 is not suitable for connec-
tion to the sensor.
5
1
Fig. 22: Connecting the PC via HART to the signal cable
1 MINITRAC 31
2 HART resistance 250 Ω (optional depending on processing)
3 Connection cable with 2 mm pins and terminals
4 Processing system/PLC/Voltage supply
5 Voltage supply
Necessary components:
•
MINITRAC 31
•
PC with PACTware and suitable VEGA DTM
7 Setup with PACTware
2 4
3
3
59